5 discussions on Cabling-Design.com Forums about the Elk ELK-M1XSP: what owners asked, what went wrong, and what fixed it.
I just recentely purchased a NX-8E and would like it to communicate viathe RS232 port to a home automation system. For example, when someoneopens a sensored door, have the NX-8E send a ASCII command to mylighting system to automatically...
Hello all,Looking for some input on home lighting automation systems and the possible control thru a panel such as the Elk M1Gold.Project involves a Main House with Detached Garage/Shop(500') and Studio(400').Has anyone here actually done...
Two questions:I sent a message to the email address on the Z-WAVE site,( and it was eventually returned as undeliverable.Are they still around?2. According to the ELK documentation for their Z-WAVE interface,Z-WAVE modules report their...
Hello,Anyone have the Elk M1 panel? I am looking to replace a home alarm system (DSC for which I don't have the master code) and do a little home automation. My plan is to use some UPB devices from simply automated for lighting control. Any...
I have a vendor that is spec'ing an Aegis alarm system for a 8MM homewhich will be connected to a Crestron automation system. We arehearing from other vendors that Aegis is not the same caliber as moremature alarm systems such as those...