6 discussions on Cabling-Design.com Forums about the Cisco NM-2FE2W: what owners asked, what went wrong, and what fixed it.
Hi all,I need hel all of youI need to deploy 2 routers using serial interfaces on differentlocationsOne Will be used for 2 Mbps serial link and other will be used for 4MbpLink.I need to know which model support for 2Mbps and 4MbpsCould you...
cisco 2651XM router with wic1-adsl cardIOS: (12Mb)broadband = bog standard 8Mb adsl on BT lineI've discovered to my dismay my cisco router only gives me half thebroadband speed of a cheap plastic router (Billion 5200G). If I connectmy PC...
Hi everyone,I've acquired an ADSL WIC to use but need to upgrade the IOS on my Cisco3620 router (currently running 12.2.3 with IO3 feature set). A few peoplehave told me that the ADSL WIC's only work in certain NM's. I have a NM-2E2Win the...
I've got a Cisco 3640 with 128M/32M RAM. There are 2x NM-2FE2W and 4xWIC-1DSU-T1 cards installed. The configurations for the interfaces arebelow. I have 4 point-to-point T1s coming into this router. 3 T1s arecoming from another 3640 at one...
Hi there. I have a 3640 running enterprise plus 12.4(8) that won't seea WIC-1ADSL card.The WIC card is inserted into a NM 2E 2W Network Module, along with aWIC-1T1DSU. I have swapped WIC slots, and tried booting just with theADSL WIC, no...
Hi All,I am currently looking at doing some Cisco training CCNA/CCNP to start with. I am looking for a good source of information regarding what exams I need to take and also info regarding all the different modules that Cisco supply, such...