5 discussions on Cabling-Design.com Forums about the Cisco 827-4V: what owners asked, what went wrong, and what fixed it.
Hello,I have a Cisco 827-4V router.It has 4 voice ports but I could not find any kind of documentationon how to set up the 4 voice ports as fxs ports andhow to swet up a voip connection to my voip provider,since this router should support...
Hello,We are using a Cisco 827-4V as a SIP gateway for an analog phone. Thephone registers, but we're getting one way audio. We found there is anasync routing path. The PSTN GW should be talking to the SIP NATserver, but the Cisco is...
Hello!Could you tell me why I can't see name from station-id name on voice-port ?I configured: station-id name Test station-id number 2222The I do call from 827-4V to 3845 which is connected over ISDN PRI toAvaya Definity,But I see only...
Hello,I tried to upgrade my 827-4V. I already had 8Mb onboardThe flash card I used is an Intel miniature card series 200 Flash 4Mb (5 Volts). The system didn't recognize the card and I'm sure the card itself is working because I tested it...
Hi all,I bought a used Cisco 827-4V for home use, just to try to play with IOS.Unfortunately, I played too much and I have involuntary delete the flash with the IOS image 12.1.I had, from a friend that has the same router, the IOS 12.2 ( I...