6 discussions on Cabling-Design.com Forums about the Cisco 4507R: what owners asked, what went wrong, and what fixed it.
hi all,okay, Cisco's 'Trunking' is not what the rest of the world understands when it hears 'Trunking', there are many examples where Cisco uses exactly one well-known term in a totally different manner.however, i now have another situation...
Good morning all,We are having an issue with Broabcom Gigabit NetXtreme Nics. One ofthe NICs reports that it is connected at 100 Mb instead of 1000. Weare running a Cisco 4507R on the backend. Cisco IOS Version is 12.2(20). I know this is...
Hello:My company is looking at the 4507R which seems to be overkill for us(but that is ok). Right now we have a mishmash of HP Pro Curve 4000Msand inexpensive Dell Power Connect switches. We are looking to go to acore switch for our...
Hi All,I used since some years two switches Cisco 4006 (level 3) on the backbone network.I connected some switch 2950, 2960, 3550 and 3750 to the switch 4006 by GBIC interface (GigaEthernet) with STP enabled.Each switch 4006 is equiped of...
I have been asked to help implement a network for a school. They havea MC3800 router with two serial ports and one Ethernet port. Sincefunds are limited to buy another ethernet module, someone designed thenetwork using what they have. ...
We are trying to use a 3Com wireless router in one of our trainingrooms to allow public internet access when in that room. We havejacked it into a port in a Cisco Catalyst 3500XL, which is jackeddirectly into our Cisco Catalyst 4507R. We...