1721 router with 4esw card not routing
I am trying to use this router to segment off a subnet with my printers on it. I've created a vlan 2 and assigned it to port 4 on the wic card. I can't ping through the router either way, and i have no connectivity. Anyone have any idea what i'm doing wrong? all i'm trying to do is connect the 192.168 and 172.16 networks. Any help would be much appreciated. Thanks! Building configuration...
Current configuration : 1120 bytes
!version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!hostname printer_router
!boot-start-marker
boot-end-marker
!enable password
!no aaa new-model
!resource policy
!mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
! !no ip dhcp use vrf connected
! ! ! ! ! !interface FastEthernet0
ip address 192.168.x.x 255.255.255.0
speed auto
!interface FastEthernet1
!interface FastEthernet2
!interface FastEthernet3
!interface FastEthernet4
switchport access vlan 2
!interface Vlan1
no ip address
!interface Vlan2
ip address 172.16.x.x 255.255.255.0
!router eigrp 1
network 192.168.a.0
network 192.168.b.0
network 192.168.c.0
network 192.168.d.0
network 171.16.a.0
no auto-summary
no eigrp log-neighbor-changes
!no ip classless
ip route 0.0.0.0 0.0.0.0 192.168.x.x
!no ip http server
! !control-plane
! !line con 0
password
line aux 0
password
modem InOut
transport input all
flowcontrol hardware
line vty 0 4
password
login
read more and respond »Posted 5 years ago by Craig in Cisco Systems
