Cisco 2611 with old Ios installed - need to upgrade?
Hey,
I just got a rather old Cisco 2611 router with 2 10Base-T and one serial wic installed. After quite a time its the first cisco router I had to configure... so I'm kind of outdated with those cisco's as the cisco itself I think...
All I want this 2611 to do is:
make a pppoe connection to a ADSL provider make a dyndns update to be accessible even with a dynamic ip do pat/nat on the internal network forward two external ports to an internal server make it accessible by ar BRI-ISDN (which isn't built in yet) from the outside.
I don't know if the IOS which is installed does really support all this, so, I really appreciate your help if it can do this with this version
cisco2611>sh ver Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 11.3(4)T1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1998 by cisco Systems, Inc. Compiled Wed 01-Jul-98 11:48 by phanguye Image text-base: 0x80008084, data-base: 0x80552544
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
cisco2611 uptime is 20 hours, 3 minutes System restarted by reload System image file is "flash:c2600-i-mz.113-4.T1", booted via flash
cisco 2611 (MPC860) processor (revision 0x202) with 18432K/6144K bytes of memory. Processor board ID JAB030908CE (2392022389) M860 processor: part number 0, mask 49 Bridging software. X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s) 1 Serial network interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write)Configuration register is 0x2102
Thank you very much for your help,
Cheers,
Uli-G
read more and respond »Posted 5 years ago by trashcan in Cisco Systems
