Cisco 3550 VLAN to Netgear Wireless Switch
I have a client who wants to offer wireless internet to visitors.
We have a VLAN set up and all 3550s can ping each other over the VLAN.
However, once I plug in the Netgear into the post assigned to the VLAN on the 3550, I can't ping from anything attached to the Netgear, nor can I ping the Netgear from the 3550. (I have "accept pings from internet" turned on on the Netgear)
I assume I need to make some other modifications to the Port config?
This is what I have so far:
interface FastEthernet0/24 switchport access vlan 200 switchport mode access switchport voice vlan 114 mls qos trust device cisco-phone mls qos trust cos auto qos voip cisco-phone wrr-queue bandwidth 20 1 80 10 wrr-queue min-reserve 1 5 wrr-queue min-reserve 2 6 wrr-queue min-reserve 3 7 wrr-queue min-reserve 4 8 wrr-queue cos-map 1 0 1 2 4 wrr-queue cos-map 3 3 6 7 wrr-queue cos-map 4 5 priority-queue out spanning-tree portfast
I assume its safe to remove the phone stuff, but I'm not sure what I have to do for the switchmode (if anything?)
Many thanks... I'm kinda new at this and have been thrown to the sharks, as it were...
Jeff
read more and respond »Posted 5 years ago by Jeff Knapp in Cisco Systems
