Media for Cisco 1711 VPN hardware module support for AES ???

Cisco 1711 VPN hardware module support for AES ???

Trying to enable AES encryption on a Cisco 1711 router running IOS

12.3(11)T3 which has a VPN hardwre module.

The following message does not look promising:

crypto isakmp policy 10 encr aes ! Policy disabled because algorithm not supported by encryption hardware authentication pre-share group 2 lifetime 120

#sh ver | inc IOS Cisco IOS Software, C1700 Software (C1700-ADVSECURITYK9-M), Version

12.3(11)T3, RELEASE SOFTWARE (fc4)

#sh diag ...

Slot 3: Virtual Private Network (VPN) Module Port adapter, 1 port Port adapter is analyzed Port adapter insertion time unknown EEPROM contents at hardware discovery: Hardware Revision : 2.1 Part Number : 73-4586-02 Board Revision : C0 Deviation Number : 0-0 Fab Version : 03 PCB Serial Number : FOC084834QY RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 Product (FRU) Number : MOD1700-VPN= EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF 40 01 79 41 02 01 82 49 11 EA 02 42 43 30 0x10: 80 00 00 00 00 02 03 C1 8B 46 4F 43 30 38 34 38 0x20: 33 34 51 59 03 00 81 00 00 00 00 04 00 FF FF FF 0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Anyone using AES on a Cisco 1710 ?