AP 1200

Hi guys, I have an Aironet 1200 that keeps reloading, I have tried the escape button to go to the rommon, and tried as well to recover the image through the Mode button, both are not working. I can not access both the CLI and the web page due to the frequent reload. I might have done something wrong with the image name for downloading it, where the Aironet configuration Guide mentions that the image should have the following format :

c1200-k9w7-tar.122-15.JA.tar

while what I get after upload is:

c1200-k9w7-mx.122-13.JA4.tar

So I changed the mx into tar desperately, and still it could not find the image after the Mode button recovery.

1. Below you will find how it keeps reloading,

Ethernet port 0 initialized: link is up Loading "flash:/c1200-k9w7-mx.122-13.JA4/c1200-k9w7-mx.122-13.JA4"...########### ################################################################################ ################################################################################ ################################################################################ ################################################################

File "flash:/c1200-k9w7-mx.122-13.JA4/c1200-k9w7-mx.122-13.JA4" uncompressed and installed, entry point: 0x3000 executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706

Cisco Internetwork Operating System Software IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA4, EARLY DEPLOYMENT RE LEASE SOFTWARE (fc1) Technical Support:

(c) 1986-2004 by cisco Systems, Inc. Compiled Fri 16-Apr-04 12:22 by cmong Image text-base: 0x00003000, data-base: 0x0053CF74

Initializing flashfs...

flashfs[1]: 145 files, 6 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 7741440 flashfs[1]: Bytes used: 7450624 flashfs[1]: Bytes available: 290816 flashfs[1]: flashfs fsck took 5 seconds. flashfs[1]: Initialization complete....done Initializing flashfs. Xmodem file system is available. flashfs[0]: 145 files, 6 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 7450624 flashfs[0]: Bytes available: 290816 flashfs[0]: flashfs fsck took 26 seconds. Reading cookie from flash parameter block...done. Base ethernet MAC Address: 00:11:bb:bc:5a:94 Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbs, full-duplex Ethernet port 0 initialized: link is up Loading "flash:/c1200-k9w7-mx.122-13.JA4/c1200-k9w7-mx.122-13.JA4"...########### ################################################################################ ################################################################################ ################################################################################ ################################################################

File "flash:/c1200-k9w7-mx.122-13.JA4/c1200-k9w7-mx.122-13.JA4" uncompressed and installed, entry point: 0x3000 executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706

Cisco Internetwork Operating System Software IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA4, EARLY DEPLOYMENT RE LEASE SOFTWARE (fc1) Technical Support:

(c) 1986-2004 by cisco Systems, Inc. Compiled Fri 16-Apr-04 12:22 by cmong Image text-base: 0x00003000, data-base: 0x0053CF74

Initializing flashfs...

flashfs[1]: 145 files, 6 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 7741440 flashfs[1]: Bytes used: 7450624 flashfs[1]: Bytes available: 290816 flashfs[1]: flashfs fsck took 5 seconds. flashfs[1]: Initialization complete....done Initializing flashfs. Xmodem file system is available. flashfs[0]: 145 files, 6 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 7450624 flashfs[0]: Bytes available: 290816 flashfs[0]: flashfs fsck took 26 seconds. Reading cookie from flash parameter block...done. Base ethernet MAC Address: 00:11:bb:bc:5a:94 Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbs, full-duplex Ethernet port 0 initialized: link is up Loading "flash:/c1200-k9w7-mx.122-13.JA4/c1200-k9w7-mx.122-13.JA4"...########### ################################################################################ ################################################################################

1. The Mode button.

button is pressed, wait for button to be released... button pressed for 47 seconds process_config_recovery: set IP address and config to default 10.0.0.1 process_config_recovery: image recovery image_recovery: Download default IOS tar image tftp://255.255.255.255/c1200-k9w7

-tar.default

examining image...tftp://255.255.255.255/c1200-k9w7-tar.default: no such file or directory

ERROR: Failed to open archive file tftp://255.255.255.255/c1200-k9w7-tar.default download takes about 0 seconds Loading "flash:/c1200-k9w7-mx.122-13.JA4/c1200-k9w7-mx.122-13.JA4"...##########

And the TCP/IP setting for the TFTP are correct for sure.

read more and respond »

Posted 5 years ago by Andy in Cisco Systems

Report misuse