I have configured a Watchguard Firebox X as a NAT between 2 networks. The configuration is up and running, however the route will not work. I flush the ARP cache, which then enables the packets to go on the correct routes. After a few minutes, they stop again and I need to reflush the cache. Let me know if you need any additional information.
Thanks
Need more info:
1) External Interface: IP Range Assigned 2) Trusted Interface: IP Range Assigned 3) Optional Interface: IP Range Assigned 4) What rules do you have mapping Ext to Trusted and other directionsI have a bunch of the Firebox II/III installed, post back with the details and I'll see if I can help.
It sounds like you've not properly configured the unit and it's auto-blocking your networks from each other.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.