Ethernet LAN

More Than One Fiber Optic 100 Megabit Ethernet Standard?

Is there more than one standard for passing 100 Base ethernet over fiber? I have a media converter that says it will co...

15 comments posted 19yrs

posted by westes-usc

15 comments posted 19yrs posted by westes-usc

Fibre Channel over Gigabit WAN Ethernet without FCIP possible?

Hi group, I have a general understanding question. We have a SAN and we need to extend it to a second location via a 1G...

4 comments posted 19yrs

posted by sparket

4 comments posted 19yrs posted by sparket

Best way to use 5Mbps LAN extension to remote office?

Currently we have two offices. A head office with a Terminal Server and a remote office with approx 25 people (and thei...

0 comments posted 19yrs

posted by bertram.chan.scfg.ca

0 comments posted 19yrs posted by bertram.chan.scfg.ca

Linksys says I need a Windows machine to update my firmware

Bought a Linksys WRT54G wireless router, and I couldn't get it to work. When 192.168.1.1 did show up in Safari and I pu...

51 comments posted 19yrs

posted by kentsteve2005

51 comments posted 19yrs posted by kentsteve2005

CCIE Lounge

Come check out The CCIE Lounge at http://ccie-lounge.blogspot.com. This blog is dedicated to those sometimes offbeat di...

0 comments posted 19yrs

posted by daniel.cantor

0 comments posted 19yrs posted by daniel.cantor

data plane

Hello, I hit on terms 'data plane' and 'control plane', but hardly was able to find proper explanations. Could someone g...

2 comments posted 19yrs

posted by mrv

2 comments posted 19yrs posted by mrv

strange ethernet electric problem

Hello, we have to connect two computers via ethernet in an industrial enviroment. we are using a crossover cable to con...

37 comments posted 19yrs

posted by null

37 comments posted 19yrs posted by null

VLAN Routing

I posted awhile back on another group explaining my situation. We are trying to bring together two very large networks....

3 comments posted 19yrs

posted by Bowman.NicholasW

3 comments posted 19yrs posted by Bowman.NicholasW

506e 2 interfaces

I have an 506e with 2 interfaces and I need to setup an vlan for a new internet network that I need to setup. But the b...

1 comments posted 19yrs

posted by larskman

1 comments posted 19yrs posted by larskman

Generate packet with bad CRC

Hi, Does someone know if there's a way to send ethernet packet with bad CRC, with a fiber optic card? And if it is also...

3 comments posted 19yrs

posted by keul125

3 comments posted 19yrs posted by keul125

Change MAC address

I have a question geared toward anyone familar with networking. I needto change my IP address and/or change my MAC addr...

3 comments posted 19yrs

posted by u35201

3 comments posted 19yrs posted by u35201

Auto MDI/X for Gigabit Ethernet 1000BASE-T

Hello - I have a question on the Auto MDI/X feature on 1000BASE-T Gigabit Ethernet Copper. Does it work using same conc...

1 comments posted 19yrs

posted by kmatpral

1 comments posted 19yrs posted by kmatpral

3com and roving analysis port

I trying to enable roving on and "3Com SuperStack 3 Switch 4400" with a total of 3 members in the stack, but im getting...

4 comments posted 19yrs

posted by larskman

4 comments posted 19yrs posted by larskman

Looking for low cost Ethernet split switch

I am doing some testing, I have Two router boards (switch ports), I have to connect my laptop to one board at a time, e...

1 comments posted 19yrs

posted by tvnaidu

1 comments posted 19yrs posted by tvnaidu

Fiber card in promiscuous mode under linux

Hi, I have a fiber optic tap and two computers under widows/linux with fiber cards. The tap gives a copy of the network...

2 comments posted 19yrs

posted by keul125

2 comments posted 19yrs posted by keul125