PIX - "No route to" messages - what is causing these ???

Feb 15, 2005 0 Replies

fw2# sh log Syslog logging: enabled Facility: 23 Timestamp logging: enabled Standby logging: disabled Console logging: disabled Monitor logging: level debugging, 0 messages logged Buffer logging: level debugging, 1866 messages logged Trap logging: level debugging, 1866 messages logged Logging to outside 192.168.2.2 History logging: disabled Device ID: disabled



111008: User 'enable_15' executed the 'clear logging' command.
111009: User 'enable_15' executed cmd: show logging
111009: User 'enable_15' executed cmd: show logging
111009: User 'enable_15' executed cmd: show logging
110001: No route to 192.168.2.2 from 10.1.1.2
111009: User 'enable_15' executed cmd: show logging
111009: User 'enable_15' executed cmd: show route
110001: No route to 192.168.2.2 from 10.1.1.2 fw2#


fw2# sh route outside 0.0.0.0 0.0.0.0 10.1.1.1 1 OTHER static outside 10.1.1.0 255.255.255.0 10.1.1.2 1 CONNECT static outside 192.168.1.0 255.255.255.0 10.1.1.1 1 OTHER static inside 192.168.2.0 255.255.255.0 192.168.2.1 1 CONNECT static



inside address is 192.168.2.2 outside addres is 10.1.1.2


Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required