PIX 501 to Watchguard SOHO

Hello,

I am trying to setup up a Site-To-Site VPN connection between a Cisco PIX 501 and a WatchGuard SOHO. I currently have a VPN connection up and working on the PIX to another location however the second one will not even attempt to establish. I am a newb when it comes to PIX's and have only used the gui, blasphmy I know. Well here is the config and please any help would be apprecated, since this location go live tomorrow.

Result of firewall command: "sh runn"

: Saved : PIX Version 6.3(5) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password encrypted passwd encrypted hostname pix-1617 domain-name deltarad.local fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.100.0 DSJ1617 name 192.168.80.0 manteca name 192.168.90.0 MMU access-list inside_outbound_nat0_acl permit ip DSJ1617 255.255.255.0 manteca 255.255.255.0 access-list inside_outbound_nat0_acl permit ip DSJ1617 255.255.255.0 MMU 255.255.255.0 access-list outside_cryptomap_3 permit ip DSJ1617 255.255.255.0 manteca

255.255.255.0 access-list outside_cryptomap_23 permit ip DSJ1617 255.255.255.0 MMU 255.255.255.0 pager lines 24 mtu outside 1500 mtu inside 1500 ip address outside 67.123.149.162 255.255.255.252 ip address inside 192.168.100.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm pdm location 192.168.100.10 255.255.255.255 inside pdm location manteca 255.255.255.0 outside pdm location 192.168.75.0 255.255.255.0 inside pdm location 192.168.4.0 255.255.255.0 inside pdm location 192.168.2.0 255.255.255.0 inside pdm location 199.127.36.0 255.255.255.0 inside pdm location 192.168.100.125 255.255.255.255 inside pdm location manteca 255.255.255.0 inside pdm location MMU 255.255.255.0 outside pdm location MMU 255.255.255.0 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 route outside 0.0.0.0 0.0.0.0 67.123.149.161 1 route inside 192.168.2.0 255.255.255.0 192.168.100.253 1 route inside 192.168.4.0 255.255.255.0 192.168.100.253 1 route inside 192.168.75.0 255.255.255.0 192.168.100.253 1 route inside 199.127.36.0 255.255.255.0 192.168.100.253 1 timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server LOCAL protocol local http server enable http 192.168.100.1 255.255.255.255 inside http 192.168.100.10 255.255.255.255 inside http 192.168.100.125 255.255.255.255 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set manteca esp-3des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 3 ipsec-isakmp crypto map outside_map 3 match address outside_cryptomap_3 crypto map outside_map 3 set peer 216.139.17.114 crypto map outside_map 3 set transform-set manteca crypto map outside_map 23 ipsec-isakmp crypto map outside_map 23 match address outside_cryptomap_23 crypto map outside_map 23 set peer 82.206.238.198 crypto map outside_map 23 set transform-set ESP-3DES-SHA crypto map outside_map interface outside isakmp enable outside isakmp key ******** address x.x.x.x netmask 255.255.255.255 no-xauth no-config-mode isakmp key ******** address x.x.x.x netmask 255.255.255.255 no-xauth no-config-mode isakmp identity address isakmp nat-traversal 20 isakmp policy 10 authentication pre-share isakmp policy 10 encryption 3des isakmp policy 10 hash sha isakmp policy 10 group 2 isakmp policy 10 lifetime 86400 isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 192.168.100.1 255.255.255.255 inside telnet 192.168.100.125 255.255.255.255 inside telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd address 192.168.100.10-192.168.100.20 inside dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside terminal width 80 Cryptochecksum:2b859b0ed2bb186192f6d2739e6bd870 : end
Reply to
lnichols3
Loading thread data ...

You may also wish to investigate the Tek-Tips WatchGuard solutions Forum:

formatting link
Sincerely,

Brad Reese Cisco Power Supply Headquarters

formatting link

Reply to
www.BradReese.Com

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.