error multiple uses of access control list

Hi All: I've been able to further clean out my config, but I'm still getting the error above when I try to open PDM on my Pix. My config below is current...can someone point me to the error that's causing the "multiple use of access control list" warning?

: Saved : Written by enable_15 at 19:51:27.218 PST Thu Nov 15 2007 PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password RQPm7xkzY.37Q.Ne encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname joejobPIX-main domain-name clock timezone PST -8 clock summer-time PDT recurring fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name joejob-sql name joejob-sql2 name mail name minimail object-group service webservers tcp port-object eq ftp port-object eq ftp-data port-object eq www port-object eq https port-object eq smtp port-object range 497 497 port-object range 99 99 port-object range 3389 3389 object-group network webservices network-object network-object network-object network-object minimail object-group network webservices_ref network-object network-object network-object network-object mail object-group service mail tcp port-object eq smtp object-group service mail-udp udp port-object range 407 407 access-list outside_access_in permit tcp any object-group webservices_ref object-group webservers access-list outside_access_in permit tcp any host object-group mail access-list inside_access_in permit ip any any access-list inside_outbound_nat0_acl permit ip host access-list inside_outbound_nat0_acl permit ip host access-list inside_outbound_nat0_acl permit ip host joejob-sql access-list inside_outbound_nat0_acl permit ip host joejob-sql2 access-list inside_outbound_nat0_acl permit ip any access-list inside_outbound_nat0_acl permit ip access-list outside_cryptomap_20 permit ip pager lines 24 mtu outside 1500 mtu inside 1500 ip address outside ip address inside ip audit info action alarm ip audit attack action alarm pdm group webservices inside pdm group webservices_ref outside reference webservices pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list outside_cryptomap_20 static (outside,inside) netmask 0 0 static (outside,inside) netmask 0 0 static (outside,inside) netmask 0 0 static (outside,inside) minimail mail netmask 0 0 static (inside,outside) netmask 0 0 static (inside,outside) netmask 0 0 static (inside,outside) netmask 0 0 static (inside,outside) mail minimail netmask 0 0 access-group outside_access_in in interface outside access-group inside_access_in in interface inside route outside 1 route outside 1 route outside 1 route outside 1 route outside mail minimail 1 timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server LOCAL protocol local http server enable http outside http inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec sysopt noproxyarp inside crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set strong esp-3des esp-sha-hmac crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map_1 20 ipsec-isakmp crypto map outside_map_1 20 match address outside_cryptomap_20 crypto map outside_map_1 20 set peer crypto map outside_map_1 20 set transform-set strong crypto map outside_map_1 interface outside isakmp enable outside isakmp key ******** address netmask no-xauth no-config-mode isakmp identity address isakmp policy 8 authentication pre-share isakmp policy 8 encryption 3des isakmp policy 8 hash sha isakmp policy 8 group 2 isakmp policy 8 lifetime 86400 isakmp policy 45 authentication pre-share isakmp policy 45 encryption 3des isakmp policy 45 hash md5 isakmp policy 45 group 2 isakmp policy 45 lifetime 86400 telnet timeout 5 ssh outside ssh timeout 5 console timeout 0 dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside username alfred_korn password f2mKLnt4eoMwYNJU encrypted privilege 15 username andrew_kagan password AMyxAR0GCXfFqU4L encrypted privilege 15 terminal width 80 Cryptochecksum:74ac0ac10bb913720ccd6cd30a4d6d25

--------------= Posted using GrabIt =----------------

------= Binary Usenet downloading made easy =---------

-= Get GrabIt for free from

formatting link

Reply to
Loading thread data ...

Your using access-list outside_cryptomap_20 for both your crypto map and your nat0 list, you should always use different lists fot the 2. Add this and you should be all set.

conf t access-list nonat permit ip nat (inside) 0 access-list nonat exit wr mem


Reply to
Brian V

thanks so much for the quick reply!

Reply to
cisco Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.