Hello!
I have a nat configured for an IP in a DMZ, need this server able to connect with another server in the same DMZ (also with a NAT) but using the external (homologate) IP. Until now I have not being able to do it and with every try the Stonegate firewall shows "spoofed packet". How can I configure the firewall to accept them?
You have to add the external address under the correct interface in Antispoofing. StoneGate considers the packet spoofed since the traffic is using an IP address that should not exist in that network (based on routing). Or you could just configure the server to have both IP addresses and not direct the communications through the firewall if you don't need to log the connections.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.