Hello
I successfully hooked up a Linksys 3102 SIP gateway
Does someone know what steps must be taken in Asterisk and on the Linksys to secure access to the Linksys box?
Thank you.
Hello
I successfully hooked up a Linksys 3102 SIP gateway
Does someone know what steps must be taken in Asterisk and on the Linksys to secure access to the Linksys box?
Thank you.
Have you set it up as its own trunk in Asterisk?
Jonathan
PS-- is this 'plain vanilla' Asterisk or TrixBox/freepbx?
It's very easy to prevent outgoing calls initiated by Asterisk: just don't put anywhere in the dialplan a "Dial()" statement referencing the 3102 (or if you do, don't make the context where it occurs accessible by regular users).
If you worry about direct SIP sessions from SIP clients to the 3101, you might register the 3102 to an Asterisk account and set "Make Call Without Reg:" to "No" in the "PSTN Line" screen.
Or, if nobody should be authorized to dial out, just disable the "VoIP-to-PSTN" function. In the SPA-3100 you can set the "VoIP-To-PSTN Gateway Enable:" to "No" in the same "PSTN Line" screen: the 3102 should be similar.
Enzo
No idea :-) I just added an account for this device in sip.conf.
plain vanilla (with hot fudge on top, I confess).
Looks like Enzo got to you first :) Good luck!
Jonathan
On Tue, 21 Nov 2006 08:26:03 +0800, "Enzo Michelangeli" wrote: (snip)
Thanks a lot :-) I'll check those three points.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.