12 discussions on Cabling-Design.com Forums about the Netgear FVS328: what owners asked, what went wrong, and what fixed it.
I have a small home network comprised of Windows and Linux PCs. I amnot serving anything to the internet. That is, all incoming traffic isblocked blocked.On the other hand, up until now, I allow ougtoing on a case (port/service) by case...
I have been using the NETGEAR FVS328 for about 6 months now. Itconnects a small and simple home network (a few Windows based PCs) tothe Internet.I updated its firmware as soon as a stable version was released (first1.0_09 and now I have...
We're currently using the Symantec VPN 100 but it's failing on us. Arethere any other such devices that allow you to disable NAT and use realIPs in the LAN? We have a /29 fronting a /27.
I have been using the NETGEAR FVS328 for about 6 months now. Itconnects a small and simple home network (a few Windows based PCs) tothe Internet.I updated its firmware as soon as a stable version was released (first1.0_09 and now I have...
I have an FVS328 in our main office which I have just configured forInternet access and VPN links to FVS318s at our remote offices.The VPNs are working except that after a few hours they will stoppassing data. Attempting to ping across the...
I'm looking for equipment recommendations to setup a point-to-point hardware VPN between two locations.Both locations are broadband. The 'A' Side has a static IP. ALL traffic from site 'B' will be pushed through the tunnel to side...