12 discussions on Cabling-Design.com Forums about the Insteon LM14A: what owners asked, what went wrong, and what fixed it.
I've read a few of the Insteon threads, both supporters (Bruce R) and naysayers (Dave H). I've also read about the recent recalls for warmness. Heh, can't be much worse than my CP290 (RIP) warmness.My X10 setup has been going to hell in a...
[I am posting this on USENET as well as YAHOO GROUPS - so if youmonitor both, please bear with me.]I have been scouring the web for info for a couple of weeks, but thereare some fundamental questions I cannot seem to resolve to...
I'm impressed with the concept and, so far, with the execution but am stillleery because SmartHome has such a poor track record. I also do not haveproblems with X-10 but do understand that others would probably prefersomething that is more...
While working on the XTB-II AGC loop, I discovered it can be difficult todeal with nose generated by compact fluorescent bulbs. A photo of CF noisein the X10 passband can be found at: crossings are at dead center of the trace, and 8.3mS on...
Hi there. I've been having ongoing noise issues with my newapartment and our lights go on and off at random. Aftertesting for three months and trying several different noisefilters, I don't yet have the results I need. Time to askaround...
HiI am working on a c# 2005 project using SDM [from smarthome]. My PC isconnected to powerlinc controller through USB. I have one x10 prodevice that is connected to a lamp module. I want to query the statusof the lamp module [On/Off] so i...