Cisco PIX506

7 discussions on Cabling-Design.com Forums about the Cisco PIX506: what owners asked, what went wrong, and what fixed it.

What owners report

PIX VPN help.

I have a simple site to site vpn - but one issue that I am not sure howto address...my network is on 192.168.10.xxx however the IP I need to come into theremote site on is 192.168.100.xxx - how do I adjust my routes toaccommodate...

RDP to Win2003 server thru PIX

Help..I've been reading thru these groups, google-ing and reading anything Ican.I cannot get RDP to work theu a PIXCan someone help?please send strings.. xxx.xxx.xxx.xxx = Outside IP yyy.yyy.yyy.yyy- Inside IP

PIX 506e

Hello - We are considering this firewall to go behind our Cisco 1600router which handles our T1. We have several public IPs which aremapped to internal NATed addresses, as well as port maps. We basicallyhave a few webservers, an email...

Cisco PIX506 Flash upgrade

This is directed to the hardware hackers and possibly the FrankenPIXcrowd....Has anybody succesfully upgrade a PIX506 from the native 8MB Flash to16MB Flash??The Main Board has a single Intel 8MB Strata Flash chip soldered inplace. There is...

PIX VPN and Linksys RV016

Hey all,Kind of an annoying issue. We currently have a PIX506 at our Main Ottawa Location. A PIX506 at a remote Oshawa Office, and a PIX501 at a remote Cornwall Office. Both remote offices have a constant site-to-site VPN tunnel going...

PIX 506 IPSEC

Hi, Quick question for you all. When using the group commands (object-groupnetwork) with an IPSEC configuration, does the other firewall thatterminates the IPSEC with a 506 need to support groups or will the PIX stripthese down one to one....

All discussions