Cisco C820

5 discussions on Cabling-Design.com Forums about the Cisco C820: what owners asked, what went wrong, and what fixed it.

What owners report

64MB DRAM upgrade for 831/836?

My 836 has 32MB base memory and a 16MB card. Can I replace this card by a 32MB model? The new 836 has 64MB of base memory and a maximum of 80MB (also the newer IOS versions need 64MB of DRAM)Regards,Carsten

Cisco 827 IPv6 Configuration Howto

Hi All, I'll apologise in advance if this topic seems similar to a number of others on this group, but i have read through all the others, and get a limited amount of success in trying to set this up. I have a week off work, so thought...

Bad object type when reload via snmp

I try to reload a Cisco router via SNMPsnmpset -v 1 -r 3 -t 15 -c $COM $ROUTER 1.3.6.1.4.1.9.2.9.9.0 2I receive following error:1.3.6.1.4.1.9.2.9.9.0: Bad object type: 2Any idea how to solve this?rt-*****-a999>sh verCisco IOS Software, C820...

SOHO 77 + 827 .... NAT, Port forwarding and Firewalling

Hi All,I have recently acquired a SOHO 77 adsl router and an 827H adsl router . I've managed to configure them as far as connecting via PPPOE to the ISP, and allowing LAN users to access the internet. The soho 77 will be acting as a DHCP...

QOS and bandwidth for ADSL

Hello. I'm attempting to provide some priority (not exactly QOS) on aCisco 827 for VOIP. The trouble I'm having is portraying correctbandwidth so that the router can prioritize packets for an asymetricline. It's ADSL 1.5m down, and 256k...

All discussions