Etherchannel between switch and router
Hi All,
I have a 2821 router and two 3750 switches (stacked). I wanted to create an etherchannel between the two gig ports of the router and the stacked switches. After I configure the etherchannel, i cannot ping between the two. can someone look at my config and let me know i seem to be doing wrong?
3750- - - -
vlan internal allocation policy ascending vlan dot1q tag native ! interface Port-channel15 switchport trunk encapsulation dot1q switchport trunk allowed vlan 1,200 switchport mode trunk !
! interface GigabitEthernet1/0/1 switchport trunk encapsulation dot1q switchport trunk allowed vlan 1,200 switchport mode trunk channel-group 15 mode on
! interface GigabitEthernet2/0/1 switchport trunk encapsulation dot1q switchport trunk allowed vlan 1,200 switchport mode trunk channel-group 15 mode on !
interface Vlan1 ip address 192.168.200.2 255.255.255.0
2821- - - - interface Port-channel15 no ip address hold-queue 150 in ! interface Port-channel15.1 encapsulation dot1Q 1 native ip address 192.168.200.1 255.255.255.0 no snmp trap link-status ! ! interface GigabitEthernet0/0 no ip address duplex auto speed auto channel-group 15 ! interface GigabitEthernet0/1 no ip address duplex auto speed auto channel-group 15
All of the interfaces are up up.
TIA,
R read more and respond »Posted 5 years ago by rhltechie in Cisco Systems
