Media for async 16a /cbling for patchbay (your answer to the newsgroup)

async 16a /cbling for patchbay (your answer to the newsgroup)

Hi Aaron!

Many thanks for your answer. We found out that our Octal cable wuth the DB25s should be the DTE. But still we cannot figure out how to put them on the patchbay. It is important for us to use standard cat5 cable from the patchbay to the console ports of the routers (due to the length). If you can give us one more tip it would be more than appreciated. What we tried so far: Patch cable color form octab cable bay connector

1 green 2 white 3 blue 4 yellow 5 orange 6 brown 7 red 8 black

This scrambles the console port on the terminal server...

Thanks, Christian

---------------------------------------------------------------------

Here's the pinouts for the CAB-OCTAL-ASYNC (RJ45 plugs):

formatting link

And the mapping from the RJ45 pins to the DB25 are one of the mappings shown here:

formatting link

(depending on whether your DB25s present as DCE or DTE which I don't know offhand.)

Aaron