configuring SVI between FWSM and MSFC?
I'm trying to configure the link between the MSFC and FWSM in a 6509. Using Catos on the Sup3 ive created a number of vlans and allocated them to the firewall. eg
set vlan 320 set vlan 7-17 set vlan 7-17,320 firewall-vlan 8
vlan 320 is to be the SVI
On the FWSM ive configured: nameif vlan320 outside security50 ip address outside 10.1.1.92 255.255.255.240
On the router module, ive configured: int vlan320 ip address 10.1.1.82 255.255.255.240 no shut
The Sup3 and FWSM say vlan320 is up. The MSFC says vlan320 is down/down. Furthermore, in the examples in the cisco documentation, a 'show int vlan320' lists "Hardware is EtherSVI". On my router module it describes vlan320 as "Cat6k RP virtual ethernet".
Any suggestions on why the SVI isnt working?
read more and respond »Posted 5 years ago by dexx in Cisco Systems
