Media for Routing problem

Routing problem

Hello everybody,

Here is my office network.

formatting link

DMZ reaches Internet via PIX firewall and VLAN via Sonicwall firewall. The first switch Cisco 3560G is in charge of InterVlan routing.

NAT is activated on the PIX.

Here is the routing table of the switch. 192.168.2.0/29 is subnetted, 1 subnets C 192.168.2.0 is directly connected, GigabitEthernet0/1 192.168.1.0/24 is variably subnetted, 3 subnets C 192.168.1.64/27 is directly connected, Vlan3 C 192.168.1.32/27 is directly connected, Vlan2 C 192.168.1.160/27 is directly connected, Vlan1 192.168.3.0/29 is subnetted, 1 subnets C 192.168.3.0 is directly connected, GigabitEthernet0/2 S 192.168.4.0/24 [1/0] via 192.168.3.1 S* 0.0.0.0/0 [1/0] via 192.168.2.1

The second switch's routing table is empty. There's only a default gateway to the first switch.

Here is the routing table of the PIX. outside 0.0.0.0 0.0.0.0 XX.XX.XX.17 1 OTHER static outside XX.XX.XX.16 255.255.255.240 XX.XX.XX.18 1 CONNECT static inside 192.168.1.32 255.255.255.224 192.168.3.2 1 OTHER static inside 192.168.1.64 255.255.255.224 192.168.3.2 1 OTHER static inside 192.168.1.160 255.255.255.224 192.168.3.2 1 OTHER static inside 192.168.3.0 255.255.255.248 192.168.3.1 1 CONNECT static inside 192.168.2.0 255.255.255.248 192.168.3.2 1 OTHER static dmz 192.168.4.0 255.255.255.0 192.168.4.1 1 CONNECT static

I can ping everything from the pix.

interface on the Pix but I can ping the DMZ's hosts.

the Pix but not the dmz one nor the DMZ's hosts.

My problem is that I want the VLAN hosts reach the servers on DMZ.

Thanks for your help. If you need mor informations, don't hesitate.