Cisco 2600 routing problem

I am trying to create LAB/TEST env I want to separate my 172.7.8.0 network with this new 10.190.1.0 network It is not working need some help Venkat

This is the Configuration I have for the internal router

Ver 12.1 no service pads ! ! hostname Internal ! ! enable secret enable password

IP subnet-zero Interface FastEthernet0/0 IP Address 172.17.8.70 255.255.255.0 no IP redirects no IP Mroute-cache duplex auto speed auto

Interface serial0/0 no IP Address Interface FastEthernet0/1 Ip Address 10.190.1.2 255.255.255.0 no IP redirects no IP Mroute-cache

duplex auto

speed auto

no CDP enable

router IGRP 1 redistribute connected Network 10.0.0.0 Network 172.17.0.0

IP classless no IP http server

end.

This router is for creating a 10.190.1.0 network internally

The connection sequence is From SW4006( which is on 172.17 network) to this routers fastethernet0/0 giving IP address 172.17.8.70 ( e0 of the router is

172.17.8.70)

address for this interface is 10.190.1.2 From this unmanaged SW I connected My LapTOP giving IP addess 10.190.1.5 and GW

10.190.1.2 Now From the Router I can Ping/traceroute to any 172.17.8.X Ip addresses I can ping and traceroute only 10.190.1.2 which is this router's fastethernet0/1 IP address I am not able to ping my Laptop which has an IP 10.190.1.5.

172.17.8.70 ( and rest of

172.17.8.x network) but I can not ping any 10.190.1.x network

When I do tracert from my laptop(10.190.1.5) to any 172.17.8.X network I get this

1ms 1ms 1ms 10.190.1.2 then * * * * request timedout. read more and respond »

Posted 5 years ago by VENKAT in Cisco Certification

Report misuse