Firewall Image
I copied all my firewall configurations to a tftp server. Piece o cake. However now I was thinking that it would be a good idea to copy the PIX image but I cannot seem to get it to work. I was able to copy the IOS for my routers without a problem. I found a Cisco article at the following link that explains how to copy the PIX image to a TFTP server but it is not working for me:
In the article it states:
Issue the copy flash tftp command in order to copy the PIX image from Flash to the TFTP server:
pix#copy flash tftp Address or name of remote host []? 10.0.0.1 Source filename []? pix512.bin Destination filename [pix512.bin]? Accessing tftp://10.66.64.10/backup_cfg_for_pix... !!!!
1030 bytes copied in 9.612 secs (107 bytes/sec) pix#When I do copy flash tftp all I get is this: pix# copy flash tftp Usage: copy capture: tftp:/// [pcap] copy http[s]://[:@][:]/
flash[:[image | pdm]] copy tftp[:[[//location][/pathname]]] flash[:[image | pdm]]
None of these commands are what I want (I think). I am on PIX 515 6.3.3 The TFTP-Server line is entered and it works for copying PIX configs.
Any suggestions?
Thanks
read more and respond »Posted 5 years ago by dexteroc in Cisco Systems
