port-channel between cisco switch and router
Hi, can you please give an advise how to configure port-channel between cisco 2811 router and cisco 3750 switch stack. Switch 3750 stack uses stackwise tech. on switch 3750:
interface port-channel 1 switchport trunk encapsulation dot1q switchport trunk native vlan 25 switchport trunk allowed vlan 25,867,868,1002-1005 switchport mode trunk duplex full
interface GigabitEthernet1/0/5 switchport trunk encapsulation dot1q switchport trunk native vlan 25 switchport trunk allowed vlan 25,867,868,1002-1005 switchport mode trunk speed 100 duplex full channel-group 1 mode on
interface GigabitEthernet2/0/10 switchport trunk encapsulation dot1q switchport trunk native vlan 25 switchport trunk allowed vlan 25,867,868,1002-1005 switchport mode trunk speed 100 duplex full channel-group 1 mode on
interface Vlan25 ip address 172.27.65.174 255.255.255.192 no ip redirects ip directed-broadcast no ip route-cache cef no ip route-cache
on router 2811:
interface Port-channel1 no ip address duplex full ! interface Port-channel1.1 encapsulation dot1Q 25 native ip address 172.27.65.172 255.255.255.192 no snmp trap link-status ! interface FastEthernet0/0 no ip address duplex full speed 100 channel-group 1 ! interface FastEthernet0/1 no ip address duplex full speed 100 channel-group 1
It is not possible to ping from router vlan 25 on switch.
Thanks in advance. Nikolay
read more and respond »Posted 5 years ago by nenni in Cisco Systems
