OSPF routes not in routing table
Hi all,
I'm still mostly a n00b when it comes to OSPF, but I've been using it in a fairly basic fashion for a number of years. I'm really stuck on this one, since I have a similar config going on another router and it's working as I'd expect it to.
Hardware/Software Details: 1721 w/12.3(11)T5 IP BASE software, one T1 WIC, one ADSL WIC
Goal: both the T1 and ADSL lines come back to the same 7206. The T1 is frame converted to ATM at the dslam and long story short, that conversion doesn't let me see if the T1 is up or down from the 7206 side, so I'm running OSPF. ADSL is a backup line. I want OSPF to advertise the LAN block on the 1721 back to the 7206 and the 7206 to advertise default to the 1721.
Problem: Both routers are in area 0, and both see each other as neighbors. The 7206 has the 1721s loopback, serial ints and LAN ints in it's OSPF db and routing table. The 1721 has routes (including default) in the ospf db, but not in the routing table.
Brief config snippets from both:
7206: router ospf 1 router-id 10.10.111.1 log-adjacency-changes area 0 authentication message-digest passive-interface default no passive-interface ATM2/0.10246 read more and respond »Posted 5 years ago by spork in Cisco Systems
