PIX debug
trouble bringing up VPN...
debug on x.x.x.x pix
ISAKMP (0): deleting SA: src y.y.y.y, dst x.x.x.x ISADB: reaper checking SA 0x34e93d4, conn_id = 0 DELETE IT!
VPN Peer:ISAKMP: Peer Info for y.y.y.y/500 not found - peers:0 crypto_isakmp_process_block:src:y.y.y.y, dest:x.x.x.x spt:500 dpt:500 OAK_MM exchange ISAKMP (0): processing SA payload. message ID = 0
ISAKMP (0): Checking ISAKMP transform 1 against priority 10 policy ISAKMP: encryption AES-CBC ISAKMP: hash SHA ISAKMP: default group 2 ISAKMP: auth pre-share ISAKMP: keylength of 256 ISAKMP: life type in seconds ISAKMP: life duration (basic) of 28800 ISAKMP (0): atts are acceptable. Next payload is 0 ISAKMP (0): processing vendor id payload
ISAKMP (0): processing vendor id payload
ISAKMP (0): remote peer supports dead peer detection
ISAKMP (0): processing vendor id payload
ISAKMP (0): SA is doing pre-shared key authentication using id type ID_IPV4_ADDR return status is IKMP_NO_ERROR crypto_isakmp_process_block:src:y.y.y.y, dest:x.x.x.x spt:500 dpt:500 OAK_MM exchange ISAKMP (0): processing KE payload. message ID = 0
ISAKMP (0): processing NONCE payload. message ID = 0
return status is IKMP_NO_ERROR crypto_isakmp_process_block:src:y.y.y.y, dest:x.x.x.x spt:500 dpt:500 ISAKMP: reserved not zero on payload 5! ISAKMP: malformed payload
What should I be looking at?
read more and respond »Posted 5 years ago by terrydoc in Cisco Systems
