Problem with OSPF route


I have a 10 Meg ethernet port on 'router 1' configured with IP address, it also has a secondary IP address of configured. I have declared both IP addresses with the 'wildcard' mask in the OSPF network configuration (along with a serial interface on that router). However, on my other 2 routrers I'm seeing the route to but NOT to the 'primary' address?

I only added the address to the OSPF network config in order to troubleshoot the problem, prior to adding that I was not seeing the route either, removing the secondary IP address does not resolve the problem either.

I've checked MTU size, passive-interfaces & removed all authentication in order to solve the problem, but to no avail. I've included various screen dumps in order to help, can anyone point me in the right direction?

From router 2, showing the route but not

CHICO#show ip route ospf O [110/11] via, 00:05:35, Serial0 CHICO#

From router 1, various show commands

GROUCHO#show ip ospf interface e0/0 Ethernet0/0 is up, line protocol is up Internet Address, Area 0 Process ID 5, Router ID, Network Type BROADCAST, Cost: 10 Transmit Delay is 1 sec, State DR, Priority 1 Designated Router (ID), Interface address No backup designated router on this network Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:05 Index 1/1, flood queue length 0 Next 0x0(0)/0x0(0) Last flood scan length is 0, maximum is 0 Last flood scan time is 0 msec, maximum is 0 msec Neighbor Count is 0, Adjacent neighbor count is 0 Suppress hello for 0 neighbor(s)

Excerpts from running-config

interface Ethernet0/0 description LINK TO LAN ip address secondary ip address no ip redirects no ip unreachables no ip proxy-arp ip nat outside no ip mroute-cache full-duplex no cdp enable

GROUCHO#show ip ospf database

OSPF Router with ID ( (Process ID 5)

Router Link States (Area 0)

Link ID ADV Router Age Seq# Checksum Link count 1674 0x80000004 0x00FD1F 4 1670 0x80000002 0x00BFC1 2 272 0x80000006 0x002470 4
Reply to
Loading thread data ... Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.