5 discussions on Cabling-Design.com Forums about the Proxim AP1000: what owners asked, what went wrong, and what fixed it.
In connecting to open freely provided 3rd-party APs, all within range,These questions assume no local wireless network, only wireless toethernet connection to more than one computer.Is there any difference between a client bridge, a gaming...
Hi all,I have to install a 24 dBi parabolic antenna and a LinkSys WRT54GS AP in a sealed box on the same pole, on the roof of a building.The parabolic antenna coax cable is rather short, so I'll have to put the AP sealed box on the pole,...
Can anyone confirm this?I have several laptops using the Cisco 350 PCMCIA or mini-PCI adapter.The ACU is the latest version 6.4 from the Cisco website.I have profiles pre-configured, with the SSID, the encryption key,etc. So if the AP is...
Greetings all, My cpmputer crashed with the Proxim AP1000 setuputility, does anyone have a link or that piece of software handy?Thanks a lot for all the helpLuke
My organisation currently has a wide area network configured as a ring,using our own microwave equipment. The network runs two seperate DS3circuits. At each location, there is a Lucent AP-1000 with LMC 5245 DS3Wan Adapter which converts to...