Linksys VOIP Modem 2102 on Tranzeo wireless
I've spent several days on this an I'm stumped. Here's the setup.
I have a 900 MHZ Transeo system with three radios. I have a cable drop at a farm house at the end of the cable line. My first transeo radio is configured as a wireless access point and is sending great signal to two farm houses about a half mile away. They are both downloading at between 9 and 10 MB/sec. One of the farm houses wants to use this voip modem. Ok.
So I ran the incoming signal from the tranzeo radio into a switch and then then I connected the voip modem and the pc to the switch. The pc continues to download just fine. I've configured the voip modem as per factory instructions and instructions from the voip provider but I am not able to get a dial tone on the phone that is plugged into phone line 1.
I have used the web based utility to try the account and it works fine. I can dial with the web based utility to any phone on the continent.
Can anyone suggest why I am unable to get dial tone?
TIA. N.
read more and respond »Posted 5 years ago by Nick M. Walsh in Wireless Networking
