Help Understand Cisco Router memory with sh ver command
Hi there I am studying for my CCNA but am having trouble with some practice questions to do with the output of the sh ver command. More specifically what is DRAM and what is NVRAM in the output below, any help would be much appreciated. Some books state that the 22528K/2048K bytes of memory below is DRAM? and the 8192K bytes of processor board System flash is NVRAM is that correct? _______________________________________________________________ System image file is "flash:c2600-i-mz[1].122-1.bin"
cisco 2610 (MPC860) processor (revision 0x202) with 22528K/2048K bytes of memory . Processor board ID JAB03110J2M (2158775703) M860 processor: part number 0, mask 49 Bridging software. X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s) 1 Serial network interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write)Configuration register is 0x2102
read more and respond »Posted 5 years ago by JJ in Cisco Certification
