Media for Static Route to Access Modem Config?

Static Route to Access Modem Config?

Hi Folks,

I have got a problem accessing the setup pages of my modem from behind my router. My modem is in bridge mode. I could access the setup pages when it was in half bridge ok.

Anyway, my setup looks like this:

ISP-------Modem--------Router--------------PC ISP---192.168.0.1---192.168.1.1---192.168.1.100

Again the modem is in bridge mode with DHCP turned on. Its a Dlink

302G.

The router does the login via PPPoE and has DHCP turned on. Its a Linksys WRT54G running DD-WRT v24.

I tried setting up a static route with:

Target IP Net: 192.168.0.1 Subnet Mask: 255.255.255.0 Gateway: 0.0.0.0 Interface: WAN

My modem is plugged into the WAN port.

If I plug my modem into my PC directly I can see that the gateway is indeed 192.168.0.1.

Why is this not working????

I am not sure that there is much I can do to try and isolate where its failing?

Any help or suggestion appreciate.

-Al