Still can't access remote admin on D-Link DI-804

Have a question or want to start a discussion? Post it! No Registration Necessary.  Now with pictures!

Threaded View
This is supposed to be easy but I just can't get it to work!!!????

I changed the remote admin port to 8080, 2000, 20000, etc, but I still
can't connect to the web interface from **outside** the LAN. The
browser just returns with a "The page cannot be displayed etc.. etc..
Cannot find server or DNS Error" standard Internet Explorer error
message. Within the LAN I can enter the admin tool without a problem
on all configured ports. I don't know if it's relevant, but I have a
DMZ zone set up that redirects to 192.168.0.100. I tried disabling the
DMZ, but I still can't connect to the admin web interface.

I have the same exact internet gateway/router in another office, with
the same exact problem. Can anyone tell me what's happening here????

By the way, DMZ points to a IIS Web Server (port 80) in the LAN, so my
ISP is NOT blocking port 80.

Thanks for your help..


Re: Still can't access remote admin on D-Link DI-804
Jessica Loriena wrote:

> This is supposed to be easy but I just can't get it to work!!!????
>
> I changed the remote admin port to 8080, 2000, 20000, etc, but I still
> can't connect to the web interface from **outside** the LAN. The
> browser just returns with a "The page cannot be displayed etc.. etc..
> Cannot find server or DNS Error" standard Internet Explorer error
> message. Within the LAN I can enter the admin tool without a problem
> on all configured ports. I don't know if it's relevant, but I have a
> DMZ zone set up that redirects to 192.168.0.100. I tried disabling the
> DMZ, but I still can't connect to the admin web interface.
>
> I have the same exact internet gateway/router in another office, with
> the same exact problem. Can anyone tell me what's happening here????
>
> By the way, DMZ points to a IIS Web Server (port 80) in the LAN, so my
> ISP is NOT blocking port 80.
>
> Thanks for your help..
Have you tried asking the experts here:
http://www.dslreports.com/forum/dlink



Re: Still can't access remote admin on D-Link DI-804



> This is supposed to be easy but I just can't get it to work!!!????
>
> I changed the remote admin port to 8080, 2000, 20000, etc, but I still
> can't connect to the web interface from **outside** the LAN. The
> browser just returns with a "The page cannot be displayed etc.. etc..
> Cannot find server or DNS Error" standard Internet Explorer error
> message. Within the LAN I can enter the admin tool without a problem
> on all configured ports. I don't know if it's relevant, but I have a
> DMZ zone set up that redirects to 192.168.0.100. I tried disabling the
> DMZ, but I still can't connect to the admin web interface.
>
> I have the same exact internet gateway/router in another office, with
> the same exact problem. Can anyone tell me what's happening here????
>
> By the way, DMZ points to a IIS Web Server (port 80) in the LAN, so my
> ISP is NOT blocking port 80.
>
> Thanks for your help..

Try telnetting to the web admin port, using
"telnet IPADDRESS: 80" or whatever port http is running on.
Run ethereal to see what is going on.
J--
www.pccitizen.com Safe Computing, Home wired and wireless networking tips.
....You spend your whole life figuring out what you should have done with it,
let alone what it was all about.  And then your children get to do it all
over again..




Re: Still can't access remote admin on D-Link DI-804
Make sure that the Remote Management IP Address is set to "*" (asterisk, no
quotes)

> This is supposed to be easy but I just can't get it to work!!!????
>
> I changed the remote admin port to 8080, 2000, 20000, etc, but I still
> can't connect to the web interface from **outside** the LAN. The
> browser just returns with a "The page cannot be displayed etc.. etc..
> Cannot find server or DNS Error" standard Internet Explorer error
> message. Within the LAN I can enter the admin tool without a problem
> on all configured ports. I don't know if it's relevant, but I have a
> DMZ zone set up that redirects to 192.168.0.100. I tried disabling the
> DMZ, but I still can't connect to the admin web interface.
>
> I have the same exact internet gateway/router in another office, with
> the same exact problem. Can anyone tell me what's happening here????
>
> By the way, DMZ points to a IIS Web Server (port 80) in the LAN, so my
> ISP is NOT blocking port 80.
>
> Thanks for your help..




Re: Still can't access remote admin on D-Link DI-804


idc had written this in response to
http://forums.cabling-design.com/xdsl/Re-Still-can-t-access-remote-admin-on-D-Link-DI-804-100-.htm
 :
Hi,
If your firmware is latest 1.51b16 the solution is to downgrade to
D-Link_804HV_V1.50b08.BIN
It's checked :)

--
+----------------------------------------------------------+
|            http://forums.cabling-design.com/             |
|              *** a better way to USENET ***              |
| no-spam Web and RSS interface to your favorite newsgroup |
|       comp.dcom.xdsl - 4349 messages and counting!       |
+----------------------------------------------------------+



Site Timeline