yet another biquad

formatting link
Yeah yeah, there are specs of solder on it and I didn't remove the stray flux. Whatever.

I used a n to n adapter with one of the fittings hacksawed off. The loop is the standard circumference, but in a circle rather than a square to make life easier.

Reply to
miso
Loading thread data ...

How about a link to the design formula?

Reply to
Chuck Olson

Oops - - I should have done the Google search first - -

formatting link
seems to be the reference everyone is using.

Reply to
Chuck Olson

-

formatting link
to be the reference

Actually, I never saw that bicircle page. I just used circles based on a post from Jeff Lieberman. I followed the Martysbug website as close as possible except I used loops instead of squares. The wire length is the same. Note the two wire feed used on that bicircle page is considered to be the wrong way to do the feed. My feed is coaxial. Instead of the pipe and coax shoving, I just hacked up a N to N adapter.

formatting link

Reply to
miso

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.