Engenius support hasn't been able to resolve this issue. Anyone in this forum have an idea: We have 2 EOC-3220+ units whose sole purpose in life is to extend or bridge the network between 2 locations 1/4 mile apart. We upgraded both to firmware version v1.41.05
Since the upgrade, Internet works better, however we cannot access services between locations. Interestingly, we can ping between locations without failure.
Location CR provides Internet access for HG, and has web, mail & SMB services used by HG.
Other items of interest: We can administer both EOC units from site CR, Site HG can administer its EOC unit, it can ping CR's EOC unit, but cannot administer it.
Configuration details: CR EOC: Access Point Status System Uptime 0day:18h:10m:43s Firmware Version v1.41.05 Wireless Configuration Mode AP+WDS Band 2.4 GHz (G) SSID 347cr Channel Number 1 Encryption WPA2(AP), Disabled(WDS) BSSID 00:02:6f:44:7e:74 Associated Clients 1 TCP/IP Configuration Attain IP Protocol Fixed IP IP Address 192.168.35.7 Subnet Mask 255.255.255.0 Default Gateway 192.168.35.1 DHCP Server MAC Address 00:02:6f:44:7e:74
HG EOC: Client Bridge Status System Uptime 0day:15h:47m:58s Firmware Version v1.41.05 Wireless Configuration Mode Infrastructure Client Bridge Band 2.4 GHz (G) SSID 347cr Channel Number 1 Encryption WPA2 BSSID 00:02:6f:44:7e:74 State Connected Signal Strength -77.40 Noise Level -93.50 TCP/IP Configuration Attain IP Protocol Fixed IP IP Address 192.168.35.6 Subnet Mask 255.255.255.0 Default Gateway 192.168.35.1 DHCP Server MAC Address 00:02:6f:44:7e:75
Please advise best way to get this working.
------------------------------------------------------------------------ View this thread: