1. Home
  2. Wireless Networking
  3. Dlink DWL-810+ to Netgear FWG114P or WGT634U or WPN824

Dlink DWL-810+ to Netgear FWG114P or WGT634U or WPN824

Hi

I am trying to hook up Dlink DWL-810+ to either Netgear WGT634U, FWG114P or WPN824. Prefer FWG114P. The case following is the same for any of these routers.

Case With all security and ACL off, DWL-810+ connects successfully. Switch on WEP security on, and DWL-810+ still connects successfully. But as soon as you switch on ACL on any of the Netgear routers mentioned, and type in the correct MAC address, the DWL-810+ fails to connect to that Netgear router. The MAC address used with same result as follows:

  1. Use DWL-810+ internet MAC
  2. Use DWL-810+ ethernet MAC
  3. Use PC MAC (as shown using ipconfig /all)

Can anybody point me to the right direction here, please?

Regards Leigh

CC to snipped-for-privacy@hotmail.com

Reply to
pu
Loading thread data ...
[POSTED TO alt.internet.wireless - REPLY ON USENET PLEASE]

Don't bother with ACL -- adds no real security, just causes grief.

Reply to
John Navas

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.