My DWL-2000AP+ has refused to work from the day I opened the box. The web interface has always shown the 'Firmware Upgrade' screen. So I've tried two firmware upgrades with the following versions from Dlinks website...
dwl-2000ap+_Bx_fw_v200b19_nml.bin DWL-2000AP+_Bx_FW_v210b27_nml.bin
....but on reboot I still get the 'Firmware Upgrade' screen whenever I browse to the damn thing at 192.168.0.50
After a factory reset, running Ethereal Packet Analyser on a PC with static IP 192.168.0.40 I can see that the firmware downloads OK to the Access Point at 192.168.0.50, but after after that, the 2000AP+ is just broadcasting "DHCP Discover" packets with source IP 0.0.0.0 from/to the BOOTP ports 68/67. The only way to get anything from it thereafter is with another Factory Reset.
I couldn't get through to Dlink customer support before Christmas (20 mins on hold each time), so - before I send it back in frustration - is there anyone here with any suggestions?
Cheers, Alfie.