|
Posted by MMatchan on June 23, 2008, 3:49 pm
Please log in for more thread options
I have a WDS (Wireless Distribution System) setup at Home. router 1)
is primary Buffalo , router 2 ) is Linksys both running Tomato
firmware
Have a Thinkpad laptop.
Setup works great except with 1 hitch. My Laptop's Wifi card does not
automatically switch to the strongest AP signal. IT still holds on to
the original router's connection and so Im getting low conn speeds if
I move around. I tired setting the roaming to aggressive
but no luck.....
Thoughts?
|
| Similar Threads | Posted |
| WDS - Client network card affinity | June 23, 2008, 3:49 pm |
| Best 5 GHz Client Card ? | December 31, 2004, 2:43 pm |
| client manager software needed for wireless card via dos | March 5, 2006, 11:47 pm |
| Cisco 1232AP and Z-Com client card authentication problems | September 12, 2006, 9:06 am |
| Access Point that supports Wireless Client - Client Mode | December 27, 2006, 11:25 am |
| Client to Client hotspot isolation | February 23, 2005, 1:10 pm |
| WaveRider Client-to-Client? | December 19, 2004, 8:46 pm |
| Belkin Pre-N Network Card | January 13, 2005, 4:12 pm |
| Network Woes (Perhaps a bad card?) | November 12, 2007, 10:46 pm |
| Getting a Belkin 802.11g network card to use WEP | November 17, 2007, 1:43 pm |
| BT Wireless network card problem | February 11, 2005, 10:13 pm |
| wireless network card on notebook | March 2, 2005, 12:23 am |
| Cannot see my wireless network via Broadcom card | November 21, 2005, 1:51 pm |
| Belkin Notebook Network Card | February 18, 2006, 4:13 am |
| Which Wireless Network Adapter, PCI card or USB | July 22, 2006, 12:58 pm |
WDS - Client network card affinity
Yahoo!
Google
Windows Live
del.icio.us
digg
Netscape
