|
Posted by PhilT on March 18, 2008, 11:19 am
Please log in for more thread options
We had an old ADSL router which supported NAT for more than one public
address. We have 16 addresses allocated and need to setup at least 6
for address translation.
That router failed and we picked up a BELKIN F5D7632uk4A router. It
has much better port forwarding options but we cannot expose more than
one of our public addresses - unless we use the DMZ - which is not an
option we want to use.
Are there any BELKIN routers out there that can support multiple
public addresses?
Can anyone recomend a suitable router (wireless is not important) ?
|
|
Posted by stephen on March 18, 2008, 6:42 pm
Please log in for more thread options
> We had an old ADSL router which supported NAT for more than one public
> address. We have 16 addresses allocated and need to setup at least 6
> for address translation.
> That router failed and we picked up a BELKIN F5D7632uk4A router. It
> has much better port forwarding options but we cannot expose more than
> one of our public addresses - unless we use the DMZ - which is not an
> option we want to use.
>
> Are there any BELKIN routers out there that can support multiple
> public addresses?
>
> Can anyone recomend a suitable router (wireless is not important) ?
just about any cisco running IOS can do this.
but you need to pick one with the connectivity you need, and will not be
anywhere near as cheap as a Belkin.
last time i checked an 1801 (ADSL, 8 port 10/100 switch, ISDN BRI) was $1000
list price....
but - wouldnt you be better off with a conventional LAN to WAN router (ie no
NAT) and a firewall?
--
Regards
stephen_hope@xyzworld.com - replace xyz with ntl
|
| Similar Threads | Posted |
| Support for Multipe Public IP addresses | March 18, 2008, 11:19 am |
| MAC addresses | December 7, 2004, 1:08 pm |
| Does WPA/PSK encrypt the MAC addresses ? | July 12, 2007, 3:36 am |
| Does WOWWAY have static IP addresses? | July 28, 2006, 8:15 pm |
| how to browse router's MAC addresses | October 18, 2007, 2:40 am |
| D-Link DWL 710 Repeater w/Static IP addresses | April 22, 2005, 6:29 pm |
| Force wireless connections by MAC addresses? | May 21, 2005, 5:21 pm |
| Problems with DHCP IP Addresses conflct | June 26, 2005, 12:43 pm |
| WDS with WPA, WEPplus (Was: SOHO LAN Question re: MAC addresses) | August 6, 2006, 1:57 pm |
| WDS with WPA, WEPplus (Was: SOHO LAN Question re: MAC addresses) | August 6, 2006, 1:58 pm |
| Can Someone Scanning WEP Encrypted Session See IP Addresses? | September 28, 2006, 2:40 am |
| Wireless bridge: duplicate MAC addresses ? | November 14, 2006, 9:10 am |
| WLAN AP router and private Class-B IP addresses | February 12, 2005, 4:03 pm |
| Capturing MAC Addresses from an Access Point with SNMP | July 29, 2005, 1:52 pm |
| How to keep a static IP and let DNS addresses be dynamically updated on Linksys WRT54GS ? | August 24, 2005, 9:34 am |
Support for Multipe Public IP addresses
Yahoo!
Google
Windows Live
del.icio.us
digg
Netscape
> address. We have 16 addresses allocated and need to setup at least 6
> for address translation.
> That router failed and we picked up a BELKIN F5D7632uk4A router. It
> has much better port forwarding options but we cannot expose more than
> one of our public addresses - unless we use the DMZ - which is not an
> option we want to use.
>
> Are there any BELKIN routers out there that can support multiple
> public addresses?
>
> Can anyone recomend a suitable router (wireless is not important) ?