Latest threads in Wireless Networkingshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Securing access from an *hotspot*?
By definition *hotspots* are open networks. If I am using a hotspot, say at McDonalds, how can I ensure my connection is safe from attack to my laptop? At home I am wired and safe.
3
|
16 years ago
|
3 | |
|
Boosting the Signal on a WRT54G
That reflector design by Michael Erskine really works well. I made up a free-standing variation for a PCI card antenna using the EZ-10 template. can easily detect usable signals from neighbouring...
4
|
16 years ago
|
4 | |
|
Wireless working on one PC but not on another
Download (Google) and run 'winsockxpfix.exe', this will most likely cure the problem.
1
|
16 years ago
|
1 | |
|
Basic WiMax hardware question
I read where WiMax is coming to my area in summer 2008 via Sprint/ Nextel. Since my laptop DOES NOT HAVE a PCMCIA slot, which this form of WiMax seems to require, is there going to be a way I can even...
1
|
16 years ago
|
1 | |
|
my wireless only works when in a open state - meaning no security how do i fixit?
its a netgear router and a fujistu laptop the internet only works if the network authentication is open and the data encrytion is none. what the hek? what do i do?...
1
|
16 years ago
|
1 | |
|
befw11s4 v4 & firmware 1.52.06
To update a befw11s4_v4 to firmware 1.52.06: Get tftp.exe from: Get the firmware from: Rename the firmware filename to "" A note on tftp & the befw11s4_v4: Do not try to start the tftp pgm at the same...
—
|
16 years ago
|
— | |
|
WMP54G Monitor Disabled
I can't get the monitor icon for a WMP54G PCI adapter to turn green, its always disabled. I had it working a while back but now the icon stays gray. I have re-installed a couple of times. Hardware...
—
|
16 years ago
|
— | |
|
Cantenna
Right here is my problem. I want to connect to my home wifi in a building (X) 330m away from my house. There is a four story building in the way (A).If I put a cantenna on top of building A which is...
2
|
16 years ago
|
2 | |
|
netgear router help
Hope someone can help i have a Netgear MR814v2tw router and have just bought a TP-LINK TL-WN510G card I am on VM broadband. When i install the card and scan I can see the signal strength is good but I...
1
|
16 years ago
|
1 | |
|
"routers" and PPP
I`ve noticed that for user,pass they seem to use a username with an @ like is that always the case? anybody know why? I am in the UK, the ones I Have seen have all been PPPoA. Is it only PPPoA that...
1
|
16 years ago
|
1 | |
|
Linksys VOIP Modem 2102 on Tranzeo wireless
I've spent several days on this an I'm stumped. Here's the setup. I have a 900 MHZ Transeo system with three radios. I have a cable drop at a farm house at the end of the cable line. My first transeo...
8
|
16 years ago
|
8 | |
|
Received WEP Errors
Guys, My Access Point is reporting a noticible WEP errors (Packets that have WEP encryption errors) although I did not enable this feature!? I have disabled the WEP encryption in my AP, so why I am...
—
|
16 years ago
|
— | |
|
2.5' Toshiba HDD Drive
Hi Guys, Does anyone have any spare/broken laptop drives lying around? I have a Toshiba 2.5" PATA MK8025GAS (80GB) drive and I think the drive is fine but the circuit board is dead (someone put the...
6
|
16 years ago
|
6 | |
|
Need help with my antenna
Hi I bought an 12 dBi TurboTenna Antenna. I have a pcmcia card 2835 SMC I opened it conected a rp-sma connector to the card. I also made a cable for my antenna one side with rp-sma male and the other...
—
|
16 years ago
|
— | |
|
Setting up a long distance wireless hotspot
I'm looking into setting up a wireless hotspot between 6 users with a maximum distance between us being 1.5km, which is not exactly line of sight. We are wanting to be able to connect with laptops and...
5
|
16 years ago
|
5 |