WAG200G VPN PPTP passthrough

Hallo,

Ik probeer een WAG200G router te configureren voor het doorlaten van een VPN verbinding naar een Windows Server (2003 SBS).

Hiervoor heb ik bij Security -> VPN Passthrough -> PPTP PassThrough enabled

En bij Application & Gaming -> Single Port Forwarding -> port 1723 over TPC geforward naar de server.

Bij het maken van een verbinding krijg ik wel te zien "...controleren gebruikersnaam en wachtwoord..." maar vervolgens lukt het niet (fout

721). In het event log van de server krijg ik de volgende melding:

"A connection between the VPN server and the VPN client xx.xx.xx.xx has been established, but the VPN connection cannot be completed. The most common cause for this is that a firewall or router between the VPN server and the VPN client is not configured to allow Generic Routing Encapsulation (GRE) packets (protocol 47). Verify that the firewalls and routers between your VPN server and the Internet allow GRE packets. Make sure the firewalls and routers on the user's network are also configured to allow GRE packets. If the problem persists, have the user contact the Internet service provider (ISP) to determine whether the ISP might be blocking GRE packets."

Als ik "DMZ Hosting" enable kan ik wel succesvol een VPN verbinding over PPTP opbouwen. Dit vind ik echter een te groot risico, aangezien de server maar 1 netwerk interface heeft.

Graag hoor ik een oplossing op dit probleem.

Met vriendelijke groet,

Ben de Ridder

Reply to
bdridder
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.