Hi, I have purchased a WGR614v5 and also the ProSafe client. No matter what I do, I cannot get the client to connect back to the office through the WGR614. If the router is removed and the computer is connected directly to the cable modem, then all works really well.
I have UPnP enabled, have reduced the router's MTU to 1430 and still no luck.
This is a trial prior to purchasing another 40 or so routers for employees, but I must say that this experience has left me wondering whether this NetGear stuff is up to the task.
Here is a copy of the log (IP modified) in case anyone can work out what the problem is:
4-17: 23:08:57.406 4-17: 23:08:57.406 My Connections\GLAP - Initiating IKE Phase 1 (IP ADDR=???.???.???.177) 4-17: 23:08:57.406 My Connections\GLAP - SENDING>>>> ISAKMP OAK MM (SA, VID 2x) 4-17: 23:08:57.437 My Connections\GLAP - RECEIVED>> ISAKMP OAK MM (KE, NON, VID 3x) 4-17: 23:08:58.484 My Connections\GLAP - RECEIVED>> ISAKMP OAK MM *(ID, HASH, NOTIFY:STATUS_INITIAL_CONTACT) 4-17: 23:08:59.328 My Connections\GLAP - RECEIVED