more on vpn and wireless

I looked at the routing table of the wrt54g and found, in addition to the usual ip 192.168.1.2; subnet mask 255.255.255.0, gateway 0.0.0.0 the following

destination lan ip: xxx.xxx.224.0 (numbers not presented) subnet mask: 255.255.248.0 gateway 0.0.0.0

and the second entry destination lan IP 0.0.0.0 subnet mask 0.0.0.0 gateway xxx.xxx.224.1 (xxx.xxx being the same as the above route

is this right or wrong? If wrong, how can I fix?

Reply to
Mark Klebanoff
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.