D-link DI-824VUP VPN configuring (NOOB)

hi,

i need to set VPN connection

lan - D-link DI-824VUP - internet - MyComputer

i've read the manual how to ... but it only describes how to set a tunnel between two VPN servers...

and all i want is to have access to my work lan...

Reply to
grisha0
Loading thread data ...

A quick look at the specs and it does support IPSec/PPTP/L2TP Endpoint connections. The easiest to get working will be the pptp, although not as secure as the other two methods. Using the router as a pptp endpoint terminator will let you use the client built into windows, as will the ipsec over l2tp. You'll need to go through the docs on the router and enable pptp, add a user that can connect, and then specify an IP address on the local lan you can use, or a range. Then when you have done that setup a new dial up network connection on your home PC via VPN (not dialup)and point this at the wan address of the router at your office. Page 38 of the manual I downloaded from here (

formatting link
) seems to be the place to start Simon

Reply to
Simon

thx i'll try it :]

Reply to
grisha0

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.