|
Posted by PH13 on January 18, 2007, 2:57 pm
Please log in for more thread options
I'm trying to set up a tunnel as above. I've got the various IPs in there
and the shared key but it isn't connecting. The people with the Cisco have
given me this info;
Our standard ISAKMP policy is as follows:
Encryption - 3DES
Hash - md5
Authentication - Pre-shared key
Key exchange - Diffie-Hellman group 2
IKE SA Lifetime - 3600 seconds
Our IPSec transform is:
Encryption - esp-3des
Authentication - esp-md5-hmac
Lifetime - 28800 seconds
Mode - tunnel
But I can't see where to put that on the DLink. Anyone done anything similar
please?
Peter
|
| Similar Threads | Posted |
| VPN tunnel between Dlink DFL-700 and Cisco | January 18, 2007, 2:57 pm |
| Cisco 3005 Concentrator + DLink 804HV Router | July 21, 2005, 2:46 am |
| Cisco VPN 3000 Series connecting to a DLINK DI 804HV | January 13, 2007, 11:50 am |
| domain logon through a cisco tunnel | March 1, 2006, 1:22 pm |
| Microsoft PPTP + Cisco PIX + Split Tunnel | June 13, 2007, 7:55 pm |
| Can Someone Step Me Through Making A VPN Tunnel From A Cisco 1812 To A Linksys WRV200 | August 22, 2006, 5:19 pm |
| cisco VPN ipsec tunnel virtual interface operation detail question | July 28, 2006, 3:06 pm |
| Odd problem with DLink DI-804HV | November 3, 2005, 3:50 pm |
| Need help with Dlink DI 808HV VPN Setup | December 4, 2005, 7:37 am |
| Dlink VPN drive map problem | December 7, 2005, 4:38 pm |
| Dlink IKE VPN - Blocked Ports??? | January 4, 2007, 9:23 pm |
| Problems with PPTP VPN and DLink DI-808HV | July 10, 2005, 10:10 am |
| Dlink DFL-80 VPN router Dropping packets | March 3, 2008, 10:47 am |
| Question about Dlink DI808HV and split tunnelling | January 19, 2006, 2:52 pm |
| Sometimes a tunnel... sometimes not | February 8, 2005, 3:14 pm |