Latest threads in Virtual Private Networksshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
IPSec Fallback mechanism subnet/supernet
Hi, I established two IPSEC tunnels terminating at one hub. Configuration : 1st tunnel : right subnet as 192.168.4.0/24 2nd tunnel: right subnet as 192.168.0.0/16 Both the tunnels have same gateway as...
2
|
16 years ago
|
2 | |
|
|
SecuRemote and Office Mode
Hello, I'm using CheckPoint SecuRemote to connect to my office. Because of some network changes we now must activate Office Mode - but this checkbox is disabled in my client. What can I do? I'm...
—
|
16 years ago
|
— | |
|
|
eBay: Linksys RVS4000 4-port gigabit security router w/VPN
—
|
16 years ago
|
— | |
|
|
Re: Self-signed certificates with Netgear FVS328?
Actually, after tying the above method that is, trying to generate an RSA PRIVATE KEY using the following 3 steps: 1. openssl genrsa -out 1024 2. openssl req -new -key -out ca.csr 3. openssl x509 -req...
—
|
16 years ago
|
— | |
|
|
How do I test (or troubleshoot) VPN server setup?
I think you need to first of all set your Westel 327 to bridge mode if you are using a static IP. Get the info from your ISP. Most modems have VPN pass through, so once enabled it should allow. I've...
2
|
16 years ago
|
2 | |
|
|
Cisco Router and Watchguard VPN and Firewall
Ok here is what we are trying to do. I have a Cisco 2600 Router and Watchguard SSL VPN and Watchguard 1250e firewall. I can not seem to get the VPN appliance to work. I have it behind the firewall and...
1
|
16 years ago
|
1 | |
|
|
SSG-5 VPN Status Display in WUI
I'm working on a site-to-site VPN with an SSG-5 (for the first time with this product line). I have a VPN set up with an RV042. The RV042 says the VPN is "connected". I'm wondering how the SSG-5...
—
|
16 years ago
|
— | |
|
|
RV042 / SSG-5 site-to-site Advice Needed
I have a working RV042/RV042 wite-to-site VPN. I need to replace one end with an SSG-5. I've not set up an SSG-5 before but it seems more or less "OK" and will be better as soon as I really figure out...
—
|
16 years ago
|
— | |
|
|
site to site VPN - 878
hi all, i use 878 router (open internet line) and user connect to server (back of 878) with site to site VPN. i can try to server with RDP but i can't. but i can try to connect over internet to Remote...
—
|
16 years ago
|
— | |
|
|
cisco 1811 looses connectivity ( site to site vpn )
cisco 1811 looses connectivity ( site to site vpn ) I cant maintain a site to site vpn for longer than 2 hours. it simply drops. The router at both ends are accessible via SSH , so its not like the...
—
|
16 years ago
|
— | |
|
|
Local Area Network (LAN)
Local Area Network (LAN) Both an EtherNet (wire) network and a wireless network are referred to as a Local Area Network (LAN). A wireless network does not require hubs, switchers, or routers to...
—
|
16 years ago
|
— | |
|
|
Aweful Cisco site to Site vpn - outlook 2003
"Trying to connect" shows up when launching outlook 2003. takes 2 minutes to conenct, once conencted it appears to work fine. I have added and edited hosts and lmhost file to have the latest ip...
—
|
16 years ago
|
— | |
|
|
VPN-X: Simple but useful Cross-platform P2P IP VPN solution
VPN-X:Java/ Cross-platform P2P VPN the VPN support windows 2000/XP/2003/Vista, linux ( x86,x86_64b, loongson 2E/F- Mips),Mac OS X.VPN-X allow Client has an individual Virtual IP can help employees on...
—
|
16 years ago
|
— | |
|
|
Netopia R910 Router - Router VPN: Can't PING Remote PC
I have set up a VPN (PPTP) Tunnel between two Netopia R910 routers located at a client's main office and the remote office. The main office has a static IP address (public). The network IP of the main...
1
|
16 years ago
|
1 | |
|
|
IPSec on 3Com OfficeConnecr 3CR858 with any Win VPN client
Hi all, we have some serious trouble in configuring an IPSec tunnel between a 3Com 3CR858 router and a Windows PC. The router is behind a transparent bridge on a 2/2Mbit/s SDSL link with a static IP...
1
|
16 years ago
|
1 |