Latest threads in Virtual Private Networksshow only best voted threads

Subject Author Posted Replies
 
Openvpn setup problem - linking 2 192.168.0 nets together
I'm staying somewhere where there's already a DHCP-enabled network using 192.168.0.0, with the router on 192.168.0.1 and my client usually on 192.168.0.101. My work net has an Openvpn client on...
1
1
 
Netgear vpn client
Hello all, I apoligize if multiple posts show up. I've waited 24 hours and my original 2 have not shown up.....anyway.............. I have a Netgear Prosafe wireless vpn firewall fvg318. I would like...
3
3
 
PPTP vith 2 NIC's??
Hi Is this possible: I have a workstation with 2 NIC's and running XP Pro NIC1 is used for my compagny network that's behind a firewall that doesn't allow outgoing PPTP traffic. NIC2 is connected to...
1
1
 
using checkpoint VPN with cable modem
Hi all, untill recentlly i used a checkpoint vpn with dsl connection without any problems. a week ago i changed the connection to a cable modem and now its look like i am connecting to my work place...
4
4
 
Unable to connect to work vpn using netscreen from home
Hi, When I'm at home I can't connect to our VPN; we tested it in the office and it worked ok (using dialup internet). At home I'm using broadband and I get the following error when I try to connect: "...
1
1
 
Site to Site VPN w/DHCP
Freinds, I have an intresting task assigned to me that I don't think is possible but I figured I'd throw it out there at least. Two sites, one site in USA one in China. USA site has a static address,...
6
6
 
troubleshooting VPN drops
I use VPN -PPTP to get into my office on a regular basis. I just moved and am sharing a wireless connection with my roommate. I can get online, though it is often picking and sometimes can't open a...
4
4
 
PIX to FVS318 VPN
Has anyone attempted this type of setup. We are planning on implementing a PIX core router and VPN connections to roughly 20 remote sites. Any experience or forewarning before we purchase the PIX....
1
1
 
Self-signed certificates with Netgear FVL328?
I wish to configure a VPN for less than 10 home and remote users to access the office network. The Netgear FVL328 and ProSafe VPN Client software was purchased before I arrived so it stays unless...
 
Safenet VPN Command Line
Hi, I am using SafeNet HighAssurance Remote 1.5.3 to connect to my employers network. I was wondering if anyone knew whether I can initiate a connection using a command line. Thanks in advance Stephen
 
Looking for Cisco VPN Client (XP)
Does anyone know where I can get a copy? Thanks, Yohann Yassin
1
1
 
Cisco VPN Gateway: simultaneously accept IKE and forward it to another GW inbound, on same public IP address
Can a Cisco VPN Gateway simultaneously accept IKE and forward it to another GW inbound, on same public IP address? We have a customer who claims this is possible with Cisco. What do you think? Assume...
 
Accessing our network while VPN'd into our client
We want to have a machine VPN'd into our client's network and still have that machine have the ability to move the information from the client Oracle database into our SQL database on our network via...
3
3
 
VPN pptp - strange problem
Hi all you gurues, We have some PCs sitting on a wlan behind a Cisco router. We have used NAT (one-one IP adress translation) on the router to tranlate to public addresses when the user want to onto...
 
supplied user name and password in the *.pcf file, but the vpnclient wants me to enter user name and password manually
Folks, I want to log into the VPN automatically (and periodically) from the script. I though that if I put the user name and password into the *.pcf file, the vpnclient will not ask for the manual...