Voip on WRT54G

Voip phones will not work on the network. Currently using WRT54G as the DHCP server for the network. Do I need to open any ports or change

any settings that I would not have changed by setting up DHCP? This is

one of the original WRT54G's with the older 1.0x Firmware. Would upgrading to 3.0 or higher fix the problem or do I need to run third party Firmware to get Voip phones to work. Thanks.

Reply to
lynn.bower
Loading thread data ...

What kind of VOIP phones, where's the PBX, what's the protocol, and what's the rest of your network topology?

The router probably isn't your problem, but updating the firmware is probably a good idea.

Reply to
William P.N. Smith

We have indeed confirm VoIP problems on the WRT54G firmware version

1.00.1. In general the problems consisted of unresponsive VoIP phones. We upgraded to version 1.00.6 and the problems were resolved. Whether or not this applies to your situation is another question.

snipped-for-privacy@gmail.com wrote:

Reply to
Joe

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.